View PS9214-AX_1298680.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

photocoupler ps9 2 14 high cmr, 10 mbps open collector output type 5 - pin sop photocoupler for creepage distance of 5.5 mm nepoc series document no. pn 10536 ej0 4 v0ds ( 4th edition) date published august 200 8 ns the mark shows major revised points. the revised points can be easily searched by copying an "" in the pdf fi le and specifying it in the "find what:" field. description the ps9 2 14 is an optically coupled high - speed, isolator containing a gaalas led on the input side and a photodiode and a signal processing circuit on the output side on one chip. the ps9214 is designed specifically for high common mode transi ent immunity ( cmr ) and low pulse width distortion with operating temperature. features ? long creepage distance (5.5 mm min .) ? high common mode transient immunity (cm h , cm l = 20 kv/ s typ.) ? pulse width distortion ( t phl t plh = 3 ns typ.) ? high - sp eed (10 mbps) ? high isolation voltage (bv = 2 500 vr.m.s.) ? open collector output ? ordering number of taping product: ps9 2 14 - f3, f4: 2 500 pcs/reel ? pb - free product ? safety standards ? ul approved: file no. e72422 ? din en60747 - 5 - 2 (vde0884 part 2) approved no.40008347 ( o ption) applications ? measurement equipment ? pdp ? fa network truth table led output on l off h
data sheet pn1 0536 ej0 4 v0ds 2 ps9 2 14 package dimensions (unit: mm) marking example < r >
data sheet pn1 0536 ej0 4 v0ds 3 ps9 2 14 ordering information part number order n umber solder p lating specification packing style safety stand ard approval application part number *1 ps9214 ps9214 - a pb - free 20 pcs (tape 20 pcs cut) standard products ps9214 ps9214 - f3 ps9214 - f3 - a (snbi) embossed tape 2 500 pcs/reel (ul approved) ps9214 - f4 ps9214 - f4 - a ps9214 - v ps9214 - v - a 20 pcs (tape 20 pcs cut) din en60747 - 5 - 2 ps9214 - v - f3 ps9214 - v - f3 - a embossed tape 2 500 pcs/reel (vde0884 part2) ps9214 - v - f4 ps9214 - v - f4 - a approved (option) ps9214 ps9214 - ax pb - free 20 pcs (tape 20 pcs cut) standard products ps9214 - f3 ps9214 - f3 - ax (ni/pd/au) emboss ed tape 2 500 pcs/reel (ul approved) ps9214 - f4 ps9214 - f4 - ax ps9214 - v ps9214 - v - ax 20 pcs (tape 20 pcs cut) din en60747 - 5 - 2 ps9214 - v - f3 ps9214 - v - f3 - ax embossed tape 2 500 pcs/reel (vde0884 part2) ps9214 - v - f4 ps9214 - v - f4 - ax approved (option) *1 for the application of the safety standard, following part number should be used. < r >
data sheet pn1 0536 ej0 4 v0ds 4 ps9 2 14 absolute maximum ratings (t a = 25 c, unless otherwise specified) parameter symbol ratings unit diode forward current *1 i f 30 ma reverse voltage v r 5 v detecto r supply voltage v cc 7 v output voltage v o 7 v output current i o 25 ma power dissipation *2 p c 40 mw isolation voltage *3 bv 2 500 vr.m.s. operating ambient temperature t a 40 to +85 c storage temperature t stg 55 to +125 c *1 reduced to 0.3 ma/ c at t a = 25 c or more. *2 applies to output pin v o . reduced to 1.5 mw/ c at t a = 65 c or more. *3 ac voltage for 1 minute at t a = 25 c, rh = 60% between input and output. pins 1 - 2 shorted together, 3 - 5 shorted together. recommended operating conditions parameter symbol min. typ. max. unit low level input voltage v fl 0 0.8 v high level input current i fh 6.3 10 12.5 ma supply voltage v cc 4.5 5.0 5.5 v ttl (r l = 1 k , loads) n 5 pull - up resistor r l 330 4 k
data sheet pn1 0536 ej0 4 v0ds 5 ps9 2 14 electrical characteristics (t a = 40 to +85c, unless otherwise specified) parameter symbol conditions min. typ. *1 max. unit diode forward voltage v f i f = 10 ma, t a = 25 c 1.4 1.65 1.9 v reverse current i r v r = 3 v, t a = 25 c 10 a terminal capacitance c t v f = 0 v, f = 1 mhz, t a = 25 c 30 pf detector high level output current i oh v cc = v o = 5.5 v, v f = 0.8 v 0.02 250 a low level output voltage *2 v ol v cc = 5.5 v, i f = 5 ma, i ol = 13 ma 0.15 0.6 v high level supply current i cch v cc = 5.5 v, i f = 0 ma, v o = open 3 8 ma lo w level supply current i ccl v cc = 5.5 v, i f = 10 ma, v o = open 7 11 ma coupled threshold input current (h l) i fhl v cc = 5 v, v o = 0.8 v, r l = 350 2 5 ma isolation resistance r i - o v i - o = 1 kv dc , rh = 40 to 60%, t a = 25 c 10 11 isolation capac itance c i - o v i - o = 0 v, f = 1 mhz, t a = 25 c 0.6 pf propagation delay time (h l) *3 t phl t a = 25 c 54 75 ns v cc = 5 v, r l = 350 , i f = 7.5 ma 100 propagation delay time t plh t a = 25 c 51 75 ns (l h) *3 v cc = 5 v, r l = 350 , i f = 7.5 ma 100 rise time t r v cc = 5 v, r l = 350 , i f = 7.5 ma 20 fall time t f v cc = 5 v, r l = 350 , i f = 7.5 ma 10 pulse width distortion t phl t plh v cc = 5 v, r l = 350 , i f = 7.5 ma 3 50 ns ( pwd ) *3 propagation delay skew t psk v cc = 5 v, r l = 350 , i f = 7.5 ma 60 common mode transient immunity at high level output *4 cm h r l = 350 , t a = 25 c, i f = 0 ma, v o (min.) = 2 v, v cm = 1 kv 10 20 kv/ s common mode transient immunity at low level output *4 cm l r l = 350 , t a = 25 c, i f = 7.5 ma, v o (max.) = 0.8 v, v cm = 1 kv 10 20 kv/ s
data sheet pn1 0536 ej0 4 v0ds 6 ps9 2 14 *1 typical values at t a = 25 c *2 because v ol of 2 v or more may be output when led current input and when output supply of v cc = 2.6 v or less, it is important to confirm the characteristics (op eration with the power supply on and off) during design, before using this device. *3 test circuit for propagation delay time remark c l includes probe and stray wiring capacitance. *4 test circuit for common mode transient immunity remark c l inclu des probe and stray wiring capacitance. usage cautions 1. this product is weak for static electricity by designed with high - speed integrated circuit so protect against static electricity when handling. 2. by - pass capacitor of 0.1 f is used between v cc and gnd near device. also, ensure that the distance between the leads of the photocoupler and capacitor is no more than 10 mm. 3. avoid storage at a high temperature and high humidity.
data sheet pn1 0536 ej0 4 v0ds 7 ps9 2 14 typical characteristics (t a = 25 c, unle ss otherwise specified) remark the graphs indicate nominal characteristics.
data sheet pn1 0536 ej0 4 v0ds 8 ps9 2 14 remark the graphs indicate nominal characteristics.
data sheet pn1 0536 ej0 4 v0ds 9 ps9 2 14 taping specifications (unit: mm)
data sheet pn1 0536 ej0 4 v0ds 10 ps9 2 14 recommended mount pad dimensions (unit: mm)
data sheet pn1 0536 ej0 4 v0ds 11 ps9 2 14 notes on handling 1. recomme nded soldering conditions (1) infrared reflow soldering ? peak reflow temperature 260 c or below (package surface temperature) ? time of peak reflow temperature 10 seconds or less ? time of temperature higher than 220 c 60 seconds or less ? time to preheat temperature from 120 to 180 c 120 30 s ? number of reflows three ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) (2) wave soldering ? temperature 260 c or below (molten solder temperature) ? time 10 seconds or less ? preheating conditions 120 c or below (package surface temperature) ? number of times one (allowed to be dipped in solder including plastic mold portion.) ? flux rosin flux containing small amount of chlorine (the f lux with a maximum chlorine content of 0.2 wt% is recommended.) (3) soldering by soldering iron ? peak temperature (lead part temperature) 350 c or below ? time (each pins) 3 seconds or less ? flux rosin flux containing small amount of chlorine (the flu x with a maximum chlorine content of 0.2 wt% is recommended.) (a) soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead (b) please be sure that the temperature of the package would not be heated over 100 c
data sheet pn1 0536 ej0 4 v0ds 12 ps9 2 14 (4) cautio ns ? fluxes avoid removing the residual flux with freon - based and chlorine - based cleaning solvent. 2. cautions regarding noise be aware that when voltage is applied suddenly between the photocouplers input and output or between collector - emitters at st artup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. usage cautions 1. protect against static electricity when handling. 2. avoid storage at a high temperature and high humidity.
data sheet pn1 0536 ej0 4 v0ds 13 ps9 2 14 specification of vde marks license document parameter symbol speck unit application classification (din en 60664 - 1 vde0110 part 1) for rated line voltages 300 vr.m.s. for rated line voltages 600 vr.m.s. iv iii climatic test class (din en 60664 - 1 vde0110) 40/100/21 dielectric strength maximum operating isolation voltage test voltage (partial discharge test, procedure a for type test and random test) u pr = 1.5 u iorm , p d 5 pc u iorm u pr 707 1 061 v peak v peak test voltage (partial discharge test, pr ocedure b for all devices) u pr = 1.875 u iorm , p d 5 pc u pr 1 326 v peak highest permissible overvoltage u tr 6 000 v peak degree of pollution ( din en 60664 - 1 vde0110 part 1 ) 2 clearance distance 4.0 mm creepage distance 4.0 mm comparative tracki ng index (din iec 112/vde 0303 part 1) cti 175 material group ( din en 60664 - 1 vde0110 part 1 ) iii a storage temperature range t stg C 55 to +125 c operating temperature range t a C 40 to +85 c isolation resistance, minimum value v io = 500 v dc at t a = 25c v io = 500 v dc at t a max. at least 100c ris min. ris min. 10 12 10 11 safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) package temperature current (input current i f , psi = 0) power (output or total powe r dissipation) isolation resistance v io = 500 v dc at t a = tsi tsi isi psi ris min. 150 150 600 10 9 c ma mw < r >
data sheet pn1 0536 ej0 4 v0ds 14 ps9 2 14
ps9 2 14 caution gaas products this product uses gallium arsenide (gaas). gaas vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. ? follow related laws and ordinances when disposing of the product. if there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. commission a disposal compa ny able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. ? do not burn, destroy, cut, crush, or chemically dissolve the product. ? do not lick the product or in any way allow it to enter the mouth.

▲Up To Search▲

Price & Availability of PS9214-AX

	To Download PS9214-AX Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .